Your Position: Leadsun >> Products >> High Voltage Power Supply >> EPS Series
   High Voltage Power Supply—EPS
 ESP INTRODUCTION
 

        ESP50KV-50MA series high voltage power supply is a new generation high frequency high voltage convertor, which is applied in the fields of laser power supply, high voltage test, ozone producing and air cleaning. With the function of prompt adjusting and stable safeguards, this power supply specializes in outputting constant current, constant voltage and can program output current and voltage independently, which is suitable for working conditions of frequently short circuit and flame discharge. It has the function of protection when the device or load part is in fault and or voltage, current exceed the rated value and can adjust the output promptly. The output current and voltage are shown in 3 ½ digits constantly, the resolution is 0.1kV /0.1mA

 
 RELATIVE PRODUCTS
 
 

PARAMETERS

Items

Rated value

Remarks

Input voltage

AC190~250V

Can order AC input products directly in quantities

Output voltage

0~200KV

Circuit adaptation rate

0.1% of rating output

Output voltage adaptation rate is 10%

Load adaptation rate

0.1% of rating output

Empty load to full load

Constant current and voltage working

Automatically turning at constant current and voltage working conditions

Overheat protection

Turn off the output

Heatsinks are 85 ℃

Temperature coefficient

Less than 0.01% every Celsius degree

Range between-20 ℃ to 40 ℃

Ripple coefficient

1%

Voltage monitor

Voltage monitor

Current monitor

Current monitor

Stability

0.01%

Pre heating 0.5~1 hour

Voltage rising time

50ms

Constant working, not the speed of soft starting

Ambient temperature

-20 ℃ ~+40 ℃

Flame counting

3/10 times, or this function is canceled

Go next page